Saturated Polyester Film Polyester Nonwoven Laminates

It is suitable for slot, liner, phase, and turn-to-turn insulation in low voltage electrical motors. It also can be used as interlayer insulation in transformers and other electrical appliances.

Product Details

Polyester film/polyester nonwoven flexible laminates (DMD-100) is a three layer flexible laminate in which each side of the polyester film (M) is bonded with one layer of polyester nonwoven, then coated with saturated Class F electrical insulating resin.  DMD100 has excellent mechanical properties, electrical properties and thermal resistance. It is applied as slot insulation, interphase insulation and liner insulation in F class electric motors, especially suitable for mechanized inserting slot process. It passed SGS test for toxic and hazardous substance detection.

saturated dmd100

1 Technical requirements
1.1 The surface of DMD100 is coated with Class F electrical insulating resin. The recommended colours: Blue or White.

2 Dimension:
Nominal width:1000 mm.
Nominal weight: 50+/-5kg /Roll.
The splices shall not be more than 1 in a roll.


3 Packing, transportation and Storage


3.1 6643 is supplied in rolls, sheet or tape and packed in cartons or/and pallets
3.2 6643 should be stored in clean & dry warehouse with temperature below 40ºC. Keep away from fire, heat and direct sunshine.


4 Application & Remarks
With coated heat-resistant resin which encapsulates the inner polyester film & adhesive, thus DMD100 has excellent heat resistance property. At the same time, its surface is more smooth. It is suitable for mechanized inserting slot process.

Welcome to contact Haotai, which is one of best saturated polyester film polyester nonwoven laminates manufacturers and suppliers in China, you can also get saturated polyester film polyester nonwoven laminates free sample from our factory.

Send Inquiry