Fiber Glass Silicone Sleeving

Chat Now
Product Details

Electrical Insulation Fiberglass Sleeving


2760 Fiberglass Sleeving Coated with Silicone Rubber

(In accordance with JB/T8151.1-1999,  IEC60684-3-4000/402:1991)


Glass textile sleeving coated with silicone rubber is manufactured with non-alkali fiberglass braided sleeving and coated it with silicone resin and then vulcanized it to form insulating sleeving. It possesses good qualities of dielectric, heat-resistance, excellent elasticity and cold-resistance. It can be used for wiring insulation and mechanical protection for electric machinery and electrical appliances.


Note: The breakdown voltage for sleeving which inner diameter is or below 1.5mm should not be lower than 75% of the specified voltage.

Length: The standard length of the sleeving is 1000(+20,-10) mm (continuous length may be negotiated)

 

Bore Diameter(mm)

Wall Thickness(mm)

Nominal

Tolerance

Nominal

Tolerance

1;1.5

+0.20;-0.10

0.4

±0.10

2;2.5;3;3.5

+0.30;-0.10

0.5

±0.15

4;5;6

+0.40;-0.20

0.6

±0.20

7;8;9

+0.50;-0.30

0.7

±0.20

10;11;12

+0.80;-0.50

0.8

±0.20

14;16;18;20;23;25;27

+1.00

1.0

±0.30

 

 

Property Requirements

Property

Requirements

Elasticity

The coating should not crack or appear detached;

1,after3 hours at 200±2 ℃;

2,after2 hours at -40℃~ -60℃

Flame resistance

Not less than 45seconds/25mm

Heat resistance

The coating should not crack or appear detached after 72 hours at 200±5oC.

Breakdown voltage

At room temperature:≥4.0kv;

After damp: ≥2.0kv.

silicone resinsilicone rubber



Welcome to contact Haotai, which is one of best fiber glass silicone sleeving manufacturers and suppliers in China, you can also get fiber glass silicone sleeving free sample from our factory.
Feedback